Hardness test of metal stamping parts

Hardness testing of metal stamping parts hardness testing of metal stamping parts using Rockwell hardness tester. Small stamping parts with complex shapes that can be used to test surfaces that are too small to be tested on a standard rockw···....More

2020-12-23

Metal stamping die and release production

Metal stamping die and stripper to produce metal stamping die, there are generally die base, upper die base, lower die base, stripper four parts. In order to reduce the working cycle and improve the precision of the stamping die, the manufa···....More

2020-12-23

Chassis sheet metal processing technology and acceptance sta

Blanking: blanking according to the different processing methods, can be divided into general punching, number punching, scissors open material, laser cutting, wind cutting, because of the different processing methods, blanking processing t···....More

2020-12-23

Fine metal stamping processing

Fine metal stamping is now talking about the fine processing refers to the micro parts processing technology. The definition of micro parts usually refers to the size less than 100 m in at least one direction, which has an unparalleled appl···....More

2020-12-23

The stability of metal stamping parts production and its inf

First, let's take a look at the main factors affecting the stability of metal stamping parts, respectively: the use of mold materials; The strength requirements of mold structural parts; Stability of stamping material properties; Fluctuatio···....More

2020-12-23

Metal products with the unique advantages of stamping proces

Metal stamping is a highly efficient production method, the use of composite die, especially multi-station progressive die, can be in a press (simplex or multi-station) on the completion of multiple stamping process, to achieve by the strip···....More

2020-12-23

How is the heat sink/radiator produced by stamping

Heat sink is a kind of heat dissipation device for electronic components in electrical appliances, made of aluminum alloy, brass or bronze plate, flake, flake, etc., heat sink stamping processing...How is the heat sink/radiator produced by ···....More

2020-12-23

Common problems and solutions in the stamping of stainless s

The common factors that lead to the problems in the stamping process of stainless steel stamping parts, reasonable arrangement of the process, the use of special stamping drawing oil, the selection of reliable raw materials can effectively ···....More

2020-12-23